Home > Power Supplies > A.C. Power Source & Transformers >

Instek APS-7100 AC Power Source; 1000VA Output



 
Alternative Views:


Our Price: $3,150.00

Product Code: APS-7100


GPIB:
GPIB Interface [Add $250.00]

RS-232/USB:
RS-232/USB Interface Card [Add $250.00]

Qty:  
Description Technical Specs
 
  • Features
    • 4.3 inch TFT-LCD Display, Only 88mm(2U) case height
    • Output Capacity: APS-7050(500VA), APS-7100 (1000VA)
    • Arbitrary Waveform Function
    • Surge/ Dip control for output artificial surges or dips in voltage to a DUT
    • Measurement function comprises Voltage, Current, Power, Apparent Power, Current(peak), IPKH, Frequency, Power Factor, Crest Factor
    • 10 sets of the Sequence mode, Simulate mode, and Programming mode
    • 10 sets of Preset allow users to store ten settings
    • Support Sequence, Simulate, and Program to automatically execute output after the equipment power is on
    • Support SCPI Emulation, LabVIEW Driver
    • Standard interface: USB Host, LAN
    • Support remoter control: Sync Output, Program mode signal output, Trigger In/Out, Output on/off
    • Option interface: GPIB (APS-001);RS232/USB CDC (APS-002)


APS-7000 is a series of programmable linear AC power supply, with the height of 2U and output frequency range is 45~500Hz, , the maximum rated output for APS-7050 is 500VA, 310Vrms, 4.2Arms and APS-7100 is 1000VA, 310Vrms, 8.4Arms. The optional collocation can be extended to the maximum output voltage of 600Vrms and maximum output frequency of 999.9Hz. The APS-7000 series comprises nine measurement and test functions (Vrms, Irms, F, Ipk, W, VA, PF, Ipk hold, CF), and provides user interface similar to that of AC Power Meter. The APS-7000 series, via switching many sets of current levels to increase small current measurement resolution, is ideal for the LED industry and standby mode power consumption test. To meet the test criteria of line voltage fluctuation often seen in consumer electronics, APS-7000 series not only supply a stable source of AC, they also features five methods to cope with special purpose or abnormal voltage, frequency, and phase; ten sets of the Simulate mode simulate power outage, voltage increase, and voltage drop; ten sets of the Sequence mode allow users to define parameters and produce sine wave by editing steps; ten sets of the Program mode can edit AC waveform output and define the ceiling and floor level of measurement items for different DUT; Ramp Control allows users to set the variation speed for output voltage rise and fall; Surge/Dip Control simulates DUT’s input power producing a Surge or Dip voltage overlapping with output voltage waveform at a specific time.

The series is ideal for user to produce high complicated waveform and transient waveform to verify electronic product operation under adverse condition.

APS-7000 series currently involves APS-7050 & APS-7100 as below:

Model nameMax. Output Current Power RatingOutput Voltage
APS-70504.2A/2.1A 500VA0~310.0 Vrms
APS-7100 8.4A/4.2A1000VA0~310.0 Vrms
APS-7050 Operating AreaAPS-7100 Operating Area
APS-7050 Output Operating Area APS-7100 Output Operating Area


Instek APS-7000 AC Power Source - Program Mode Function Introduction

Share your knowledge of this product. Be the first to write a review »
TE Sales is Upfront